How do you use a fireplace for the first time?
Ignite your first fire by using a long-handled lighter or matches to ignite the newspaper and kindling. Use a fireplace poker to stir the sticks as needed until the larger logs ignite. Do not leave a fire unattended. Ensure the fire is fully extinguished before leaving the house or retiring to bed for the night.
How do you break in a new fireplace?
Preparing Your New Fireplace for its First Fire
- Purchase 2 Duraflame logs.
- Cut off 1/3 of one log and burn.
- Wait 2 days and burn remaining 2/3 of first log.
- Wait another 2 days and burn the entire 2nd log.
- Wait another 2 days, and you are good to go.
What are the 3 most common dangers of having a fireplace?
According to the Chimney Safety Institute of America, 21,200 of the fires in 2012 were caused by fires in a fireplace, chimney or chimney connector….Fire Hazard
- A low, rumbling sound.
- Loud popping or cracking noise.
- Hot, overpowering smell.
Why is it so hard to start a fire in my fireplace?
If there isn’t enough of a draft in the chimney, it’s difficult to get a fire going due to lack of oxygen. There are several reasons a chimney doesn’t provide enough of a draft. Branches may be obstructing the chimney. If you do have a chimney cap, it could be clogged with soot or external debris on the netting.
Can you go to bed with a fire in the fireplace?
Can I go to sleep with a fire in the fireplace? You should never go to sleep while a fire is in the fireplace. It may seem safe—after all, the fire is small and controlled behind a metal grate. Before going to bed, make sure the fire is completely extinguished.
How long should you run a new gas fireplace?
Most manufacturers don’t advise running a vent free gas fireplace for more than a few hours a day. Usually, that’s not much of an issue, because you’ll get hot in 20 minutes, and you’ll probably be ready to turn it off.
How long does it take for fireplace to cure?
Heat for 1-2 hours at 500°F. If crack or joint is more than 1/8”, multiple layers may be applied. Allow 24 hours to cure between layers. When tack free, heat for final cure.
Is it safe to sleep with a fire in the fireplace?
You should never go to sleep while a fire is in the fireplace. It may seem safe—after all, the fire is small and controlled behind a metal grate. Before going to bed, make sure the fire is completely extinguished.
How do I know if my fireplace is safe to use?
A properly operating gas fireplace will have a safe and secure glass enclosure, will ignite without delay, have a clean blueish color flame and will vent properly out through a termination cap that is clear from debris or obstruction.
Can I use lighter fluid to start my fireplace?
Never use lighter fluid, charcoal starter fluid, or any other type of accelerant to start a fire in a fireplace. These products are designed for very specific uses and should not be used to fuel an indoor fire, in part because they often contain methanol and petroleum-based chemicals that produce toxic fumes.
How many logs should I put in my fireplace?
Around 2 to 3 logs should be used when building a fire the conventional way, but more or less can be used depending on the size of you fireplace, the size of the fire you’re building and the size of the logs.
Is it safe to go to bed with a fire in the fireplace?
Is it safe to let a fireplace burn all night?
Never leave your burning fireplace unattended. Carbon monoxide is a furtive toxin, so fireplace safety warrants awareness of this compound. The smoke from burning wood contains carbon monoxide, so in order to prevent this toxic byproduct from entering your home, it is important to leave the flue open overnight.
Is it OK to leave a gas fireplace on all night?
No, you should not leave your gas fireplace on overnight as you risk carbon monoxide poisoning. Although it’s never recommended, if your gas fireplace has been properly maintained and designed to run continuously, it may be safe to leave it on.
Is it OK to leave fireplace on overnight?
Never leave your burning fireplace unattended. The smoke from burning wood contains carbon monoxide, so in order to prevent this toxic byproduct from entering your home, it is important to leave the flue open overnight.
How long does it take for fireplace cement to dry?
Air dry for 24 hours, but no longer than 30 days. Start a low fire, keeping the temperature below 220°F until mortar has dried thoroughly. Then increase heat for the final cure.
What happens to mortar in a fire?
The mortar in most brick joints consists of sand, lime, and portland cement. But in a fireplace, that mix just crumbles away when subjected to roaring wood fires.