How much oil does a 2007 GMC Yukon XL take?
How much oil does a 2007 GMC Yukon XL take?
The 2007 GMC Yukon can hold 6 quarts of oil in all three of its engine configurations. You should use an oil with a viscosity grade of SAE 5W-30 that has been certified by the American Petroleum Institute and meets GM Standard GM6094M, GM Goodwrench oil meets all the requirements for the Yukon.
How many quarts does a 2007 GMC Yukon take?
All engine configurations of the 2007 GMC Yukon should be equipped with 5.7 US quarts of 5W-30.
How much oil does a GMC Yukon XL take?
Engine Oil 8 quarts. . . (with filter)After refill check oil level.
How many quarts of oil does a Yukon take?
The GMC Yukon with a 6.2L 8-cyl engine (engine code L87) takes 8 quarts (with filter) of 0W-20 synthetic oil. A new oil filter and a crush washer are required.
What kind of oil does a 2007 GMC Yukon Denali take?
SAE 5W-30
Engine Oil
| Viscosity: | 0W-30 (Below -20) 5W-30 (All TEMPS) SAE 5W-30 is preferred. |
|---|---|
| Capacity: | 6 quarts. . . (with filter)After refill check oil level. |
| Torque: | 18 ft/lbs (Oil Drain Plug) |
What kind of transmission fluid does a 2007 GMC Yukon take?
Valvoline Synthetic Transmission Fluid Dexron VI 1 Quart.
What kind of oil does a GMC Yukon Denali take?
Engine Oil
| Viscosity: | 10W-30 (Above -18) 5W-30 (All TEMPS) SAE 5W-30 is preferred. |
|---|---|
| Capacity: | 6 quarts (with filter)After refill check oil level. |
| Torque: | 18 ft/lbs (Oil Drain Plug) |
What kind of oil does a GMC Yukon take?
Both available engines in the 2019 GMC Yukon take 7.57 liters (8 quarts) of 0W-20 engine oil. This is a synthetic fluid that reduces friction by keeping all moving components in the engine lubricated. It also helps to keep it cool.
How many quarts of oil does a 2007 Yukon Denali take?
6 quarts
Engine Oil SAE 5W-30 is preferred. Capacity: 6 quarts (with filter)After refill check oil level.
What oil does a GMC Yukon take?
How many quarts of oil does a 6.2 Denali take?
8 quarts
8 quarts (with filter)After refill check oil level.
How do you reset the oil life on a GMC Yukon?
Reset Guide: GMC Yukon Oil Life Oil Change Light (2000-2021)
- Place the ignition to the RUN position without starting the engine.
- Fully depress the GAS pedal, three times within 5 seconds.
- Turn off the ignition.
- Verify the indicator has been reset by starting the engine.
How do you reset the oil light on a GMC Yukon?
How reset oil light GMC Yukon
- Turn the ignition to run (one position before starting engine).
- Immediately after Step 1 press and release the gas pedal 3 times within 5 seconds.
- If the Change Oil Soon light flashes the system is resetting.
What kind of oil does a 2007 Yukon Denali take?
Engine Oil
| Viscosity: | 0W-30 (Below -20) 5W-30 (All TEMPS) SAE 5W-30 is preferred. |
|---|---|
| Capacity: | 6 quarts. . . (with filter)After refill check oil level. |
| Torque: | 18 ft/lbs (Oil Drain Plug) |
What oil brand does GMC use?
What Brand Of Oil Does GMC Recommend? GMC factory dealer recommends using ACDelco Dexos1 Full Synthetic engine oil for your Sierra 1500.
What kind of oil does a 2008 GMC Yukon take?
The 2008 GMC Yukon comes in various configurations, each using one of three different engines: You might have the 4.8L, 5.3L, or 6.2L (all V8s). Across each engine, You’ll use 6 quarts of SAE 5W-30 full synthetic motor oil.
How many quarts of oil does a 2007 6.2 Denali take?
Engine Oil 6 quarts (with filter)After refill check oil level.