How do I reset my KitchenAid Superba ice maker?

How do I reset my KitchenAid Superba ice maker?

Shut the freezer door and allow it to reset for 10 seconds before opening the door. Press the door’s switch three times and shut the door. Let it sit for a few seconds to reset the ice maker. This should stop the blinking lights.

Why is my KitchenAid Superba not making ice?

Not Producing Ice If your fridge’s ice maker isn’t producing ice, check that the shutoff arm or switch is in the On position. The water line shutoff valve to the refrigerator must be open, as well. If the ice maker has just been installed, the freezer temperature may not be cold enough to make ice.

How do I unfreeze my KitchenAid ice maker?

How to Defrost an Ice Maker

  1. Unplug the refrigerator and remove any ice from the ice maker and the ice tray.
  2. Locate the water refill tube that runs to the ice maker.
  3. Turn a hair dryer on low speed and point it at the refill tube to defrost.
  4. Replace the metal clip and the ice tray before plugging in the refrigerator.

Why is my ice maker blinking red?

Blinking lights with your icemaker could be due to a dirty water filter. A Kenmore ice maker with a red light blinking twice or in a constant beat could be due to something as simple as a dirty water filter, an issue with a sensor or a stuck ejector arm.

Why is my KitchenAid ice maker leaking?

If the defrost drain is frozen, the water will overflow the drain trough and drip down to the bottom of the compartment. This water can eventually leak onto the floor. Check the defrost drain to determine if it is clogged or frozen. If the defrost drain is frozen, thaw the ice.

Why is my ice maker not dispensing ice?

One of the most common – and innocent – causes of an ice maker that won’t dispense ice is that an ice clump has formed inside. In order to drop the ice cubes from the mold, heat is released to lightly melt them. Sometimes you may need to remove the entire bin or even defrost the ice maker.